Back to Main Site
Trailer Basics


... Installation of TX Basic Vehicle Trailer Add on.

Setting up trailer....

Some Instructions below may be depreciated ...

Rez the Instructions, or open the graphic to assist you. Rez out Trailer Base. You may name your trailer whatever you like, so long as the Trailer Name and the Soft Lock prim name are the same.

Put a trailer together using the mock up example, set everything to "None" prim shape type except yellow Pin, and Blue trailer "skid", keep those prim shape type "Prim".

Mock Trailer done up with 2 wheels so you can see orientation, Purple soft lock mounts to car. Yellow Pin is trailer "hitch" and root of trailer. Name Trailer and soft lock the same, and (preferably) give them the same number in their description that the car uses. (Thats your communication channel)

You may swap wheels just make sure to set them up just like you do on the vehicle rears.

Installing into car....

Link the included Soft Lock Button to your existing remote, make sure its description is also the same channel as your car and trailer.

Once thats done .... You'll want a lower 1st gear so you dont jerk it clean out of the hitch. Click , HUD button OR lock > Autoconnect and bump trailer with car, it will auto align and connect itself.
Then bring up menu again and hit Accept. Start out n 1st gear. To disconnect trailer, Click HUD button or Soft Lock > Unhook. Trailer will disconnect and set its own brake.

Final ... Your completed trailer, can be put inside your Soft Lock, and rezzed out via "Rez Trailer" button, or deleted with "Derez Trailer" button.


Sounds were removed - Causing issues with Auto Reconnect (sim crossing) features making sounds play constantly.

Scripted wheels and any lighting scripts respond with messages from the car, meaning, you can take the lighting and wheel scripts for your car and use them in your trailer.

If trailer doesn't move after Rezzing it out of Hitch - make sure its physical, or - turn off Soft Lock and Autoconnect again.

v2 - Made trailer go physical automatically after connecting, and non physical on disconnect (as before)

7 of 11 people found this helpful.   




Powered by LiveZilla Live Help Software